The Internal Leakage of the Thermal Power Plant Valve
- Sep 28, 2022
- Hits: 53
In the development of thermal power plants, the internal leakage of the thermal system valves directly affects the development. Therefore, thermal power plants should actively know the causes of internal...
What are Bellow Seal Valves
- Aug 11, 2022
- Hits: 631
A bellow seal valve is a control valve that doesn't have a conventional gland packing and instead of that these valves have a bellow cartridge and this would be welded to the valve’s bonnet...
What is ePTFE and the difference between PTFE and ePTFE
- Aug 08, 2022
- Hits: 189
What is ePTFE? It's a synthetic plastic that incorporates all of the features of PTFE while also adding a new set of mechanically improved attributes. That means expanded PTFE operates across...
Seal Selection for Valve Design and Retrofitting
- Jul 28, 2022
- Hits: 121
Introduction—Seals in an Industrial Valve Valve seals are a critical component in the overall development of a new valve. In addition, upgrading seals in an existing device with the properly selected...
Proper Valve Stem Sealing Best Practices
- Jul 28, 2022
- Hits: 592
Less leakage results in reduced product loss, increased efficiency, and improved energy management. There are many methods of sealing valve stems on control and isolation valves. When chosen carefully,...
Main Influence Factors of the Sealing of Valves
- Jul 28, 2022
- Hits: 67
There are many factors affecting the sealing of valves. There are mainly the following points. 1. Auxiliary structure of the sealing Under the change of temperature or sealing force, the...
Problems in Manufacturing Marine Valves
- Jul 13, 2022
- Hits: 43
1. An introduction to marine valves A marine valve is a device used to control the fluid pressure, flow and flow direction in the ship pipeline in order to meet the environmental conditions of the...
Quality Control in the Manufacturing Process of Marine Valves
- Jul 13, 2022
- Hits: 33
Quality management can be improved from the following aspects: 1. Strict control of the process In terms of processes, focus on ensuring the feasibility and accuracy of the process, formulate detailed...
Improvement in Butterfly Check Valves
- Jul 13, 2022
- Hits: 41
1. The improvement plan According to the failure of the butterfly check valve, the structure of the valve disc and the connection between the valve disc and the positioning rod can be improved...
The Main Reasons for Leakages of Valves and Their Measures
- Jun 13, 2022
- Hits: 54
The main reasons for leakages of valves and their measures are as follows: Leakages caused by falling off of the closing parts Reasons for falling off of...
The Use and Maintenance of Pneumatic Valves
- Jun 13, 2022
- Hits: 42
Pneumatic valves are valves driven by compressed air. When purchasing pneumatic valves, it is necessary to specify the specifications, types, and working pressure to meet the purchasing...
Causes of Leakages of Grease Injection Holes of Ball Valves
- Jun 13, 2022
- Hits: 306
Abstract: a leakage of grease injection holes of ball valves is one of the most common failures in pipelines in operation. The structure and principle of the ball valve's grease injection...