1/2 Inch Class 300 Lubricated Plug Valve - ASTM A105 Socket Weld

1/2" Class 300 A105 Lubricated Plug Valve, SW Connection
1/2" Class 300 A105 Lubricated Plug Valve, SW Connection

Key Specifications / Features

Hits: 0

This 1/2" Class 300 lubricated plug valve features an ASTM A105 forged carbon steel body with socket weld (SW) ends and a lever operator. The lubrication port ensures low operating torque and a tight seal for high-pressure oil, gas, and industrial isolation applications.

Detail Information

Product Overview

The 1/2" Class 300 lubricated plug valve is a compact, high-pressure valve designed for reliable isolation in oil, gas, and industrial piping systems. The body is forged from ASTM A105 carbon steel for excellent strength and toughness. Socket weld (SW) ends provide a strong, leak-free connection for small-diameter, high-pressure lines.

The lubricated design features a grease injection port that allows operators to inject sealant into the sealing area. This reduces friction between the plug and body, ensuring low operating torque and a tight seal even after frequent cycling or in dirty service. The lever handle provides fast, quarter-turn operation. The bolted bottom cover allows access to the internal plug for maintenance without removing the valve from the line.

Key Features

- 1/2" size, Class 300 rating
- Forged ASTM A105 carbon steel body
- Socket weld (SW) ends
- Lubrication port for low-torque operation and tight sealing
- Lever operated
- Bolted bottom cover for easy maintenance
- Yellow protective coating

Typical Applications

- Oil and gas gathering and transmission
- Natural gas pipeline isolation
- Refining and petrochemical service
- High-pressure small-bore piping
- General industrial flow control

 

Specifications Table

Parameter Specification
Product Type Lubricated Plug Valve
Size 1/2"
Pressure Rating Class 300 LB
Body Material ASTM A105 Forged Carbon Steel
End Connection Socket Weld (SW)
Lubrication Grease injection port
Operator Lever (Handle)
Body Construction Bolted bottom cover
Design Standard Confirm actual: API 599 / API 6D
End Standard Confirm actual: ASME B16.11
Test Standard Confirm actual: API 598
Cast Markings J2-300 / A105 / JL268

Comment Form

Name*
E-mail*
Rate*
Comments*

Similar Products